Download LEACH protocol source code for Wireless Sensor Networks

Welcome to download section of LEACH Protocol in Wireless Sensor Network. In this page, you can find information on downloading LEACH protocol source code for your favorite simulator software application like NS-2, Matlab, C++ and OMNeT++ for your Thesis & Research Works.

What is LEACH Protocol?

LEACH, Low-Energy Adaptive Clustering Hierarchy, is an application-specific protocol architecture for Wireless Sensor Network (WSN) widely adopted for various Sensor Network variations. It has become one of the most used bases for developing new architecture protocols or modifying the existing one in WSN. Learn more about LEACH protocol in our Sensor Network section at Understanding LEACH Protocol in Wireless Sensor Network

Download LEACH Protocol Source Code

Leach protocol was devised by Heinzelman and et. al in their work “An Application-Specific Protocol Architecture for Wireless Microsensor Networks.” The original authors have published and granted the right to use LEACH source code for academic and non-commercial research projects, Network Simulator NS-2 version of source code original link (now broken) http://www-mtl.mit.edu/research/icsystems/uamps/cadtools/.

From the page of original publishers:

LEACH: A Low-Energy Protocol Simulator for Wireless Networks. This simulator is an extension of the ns-2 simulator. It was originally developed by Wendi B. Heinzelman and is no longer being updated. The LEACH code is only compatible with ns-2.1b5.

W. Heinzelman, A. Chandrakasan, and H. Balakrishnan, “An Application-Specific Protocol Architecture for Wireless Microsensor Networks,” IEEE Transactions on Wireless Communications, Vol. 1, No. 4, October 2002, pp. 660-670.

Please, note that the source codes are available as-is without any warranty or liability of any kind thereafter. Use the LEACH Source Code at your own risk, ACADEMIC RESEARCH USE ONLY.

LEACH Source Code in Matlab ie LEACH.m is hosted in a local server of this website, and can be provided upon request for your personal research use only. Password, provided, is required to open the files leach.m and parameters.m.

Leach source code NS2, Matlab, C++ and OMNeT++ are basically functioning on the same principal. So LEACH algorithm source code downloaded in a format or for one simulator above shall produce the same result with the others. The external download links might be broken as the project code are not being updated from the original authors, to request a local copy contact me.

185 thoughts on “Download LEACH protocol source code for Wireless Sensor Networks”

  1. abhishek srivastava

    i need matlab prog. on leach for my m tech minor project……m pursuing my m tech in communication from nit kurukshetra…….plz provide me d same and help me……………

    Reply
  5. bina

    hi, i need d matlab code, could you plz help me?! i need a dv-hop localization in sensor network too, plz plz and plz help me

    Reply
  6. Ranjith V

     can u please send me leach matlab code for ranjith.v@live:disqus i need it for my pg progect.com

    Reply
  7. hiren thakkar

    hello sir,
               i am doing my PG research work. for that i need to analyze leach protocol for WSN. would you please send me LEACH code in MATLAB at my email : [email protected]

    Reply
  12. Masi

    hii
    could you plz send me matlab code for leach? I need it for my project & I would be appriciate if you send it fast, plzz. I dont have enough time 🙁

    Reply
  25. Hariprakash. Devaraj

    i’m doing my PG project in Omnetpp for that i need the source for leach protocol in both matlab and ns2, so please kindly reply as soon as possible…

    Reply
  37. sanya

    Hey the source code you have uploaded here is not available. Please send me the code for Leach protocol in NS2 and MATLAB. I require it for my project.
    Thank You
    And do you have any knowledge of where can I find the source code in NS2 for Minisec protocol in wireless sensor networks.
    Mail me the source code at [email protected] asap.
    Thanks

    Reply
  61. ganesh

    sir i m working on k-means clustering in wsn ,plz help me how to make clusters in centralized pattern and distributed pattern

    Reply
  69. Kajal Fegade

    I am working of clustering in WSN for efficient routing. I want implementation of LEACH in C++. Can any one please help me for this?

    Reply
  73. Mushahar

    I am a research associate at LUMS. Can you please give me C/C++ code for leach/teen/riser/tiser protocols? I need it for my upcoming research paper.

    Reply
  74. Aru

    I am doing M.Tech. for my project i need the LEACH protocol source code in c++ and OMnet++. Please provide the code.

    Reply
  75. Junaith

    Hi friends I'm doing M.E, and for my thesis works i need leach protocol source code, pls send me as soon as possible.

    Reply
  77. gbadeshola

    hi pls I am doing mobile sensor networks for my thesis work I need the leach protocol source code, please can kindly send it to me as soon as possible

    Reply
    1. Ekendra Lamsal

      Vijay, what's your issue here. Were you not able to download file? Everybody else downloading, and it's clearly mentioned here the source code is for educational testing purpose; not necessarily fully functional.

      Reply
  84. Md. Symun IStehad

    Hi i am doing wrireless sensor network for my thesis work i need the LEACH protocol source code in ns2.Please send me as soon as possible email

    Reply
    1. Ekendra Lamsal

      Since this is a custom code, I'm not sure the code works perfect for you as well. It implies with HWSN. Read the instructions and meaning of variables explained in the attachment. Thanks

      Reply
  95. iampremkmr1311

    hi sir, i am working on leach protocol for my project and i need this code for my project and i plan to do in NS2 can you please send this code to that helps me a lot sir and thank you in advance

    Reply
  104. Prashanth Gurram

    Sir, currently i'm working on the project "SECURE CLUSTERING IN WSN" so I need source code of LEACH PROTOCOL in OMNET++ to start my dissertation work. Would you send me the code asap. Thank u.

    Reply
  117. Hari bala

    Sir, i need LEACH protocol code for my project implementation please send the code for LEACH in NS2…it would be helpfull for me…thanks in advance

    Reply
  129. Karthik

    Hi Sir,
    I would like to have the LEACH Protocol source code for OMNET++. The link for OMNET++ is redirecting to the same page. I am at the edge of my M.E. project, Please help.
    Email ID: [email protected]

    Reply
  138. George

    Hi,
    Please send me LEACH protocol code in C++ and OMNeT++. I need to figure out how to create clusters in Castalia/Omnet++ for a protocol that I wish to test

    Reply
  158. Dana Bani Melhem

    Hello , I need leach protocol code in c++, to embedded it to QualNet , can you send to me please I realy need it !!

    Reply
  164. Neetu

    dear sir,
    I want to know how aggregation is performed by leach protocol. So i want code of leach protocol which perform aggregation.
    Thanx

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top